SpectralSensor Spectral Sensor Spektroskop + test wyświetlacza

LeonardoProMicro/SpectralSensor/SpectralSensor.ino

@@ -0,0 +1,129 @@
+/*
+  This is a library written for the AS726X Spectral Sensor (Visible or IR) with I2C firmware
+  specially loaded. SparkFun sells these at its website: www.sparkfun.com
+
+  Written by Nathan Seidle & Andrew England @ SparkFun Electronics, July 12th, 2017
+
+  https://github.com/sparkfun/Qwiic_Spectral_Sensor_AS726X
+
+  Do you like this library? Help support SparkFun. Buy a board!
+
+  Development environment specifics:
+  Arduino IDE 1.8.1
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+  ---AVAILABLE FUNCTIONS---
+  AS726X(TwoWire &wirePort = Wire, byte gain = 3, byte measurementMode = 3);
+  void takeMeasurements();
+  void takeMeasurementsWithBulb();
+  void printMeasurements();
+  byte getTemperature();
+  float getTemperatureF();
+  void setMeasurementMode(byte mode);
+  boolean dataAvailable();
+  void enableIndicator();
+  void disableIndicator();
+  void setIndicatorCurrent(byte current);
+  void enableBulb();
+  void disableBulb();
+  void setBulbCurrent(byte current);
+  void softReset();
+  void setGain(byte gain);
+  void setIntegrationTime(byte integrationValue);
+  void enableInterrupt();
+  void disableInterrupt();
+
+  //Get the various color readings
+  int getViolet();
+  int getBlue();
+  int getGreen();
+  int getYellow();
+  int getOrange();
+  int getRed();
+
+  //Get the various NIR readings
+  int getR();
+  int getS();
+  int getT();
+  int getU();
+  int getV();
+  int getW();
+
+  //Returns the various calibration data
+  float getCalibratedViolet();
+  float getCalibratedBlue();
+  float getCalibratedGreen();
+  float getCalibratedYellow();
+  float getCalibratedOrange();
+  float getCalibratedRed();
+
+  float getCalibratedR();
+  float getCalibratedS();
+  float getCalibratedT();
+  float getCalibratedU();
+  float getCalibratedV();
+  float getCalibratedW();
+*/
+#include <SPI.h>
+#include <Wire.h>
+#include <Adafruit_GFX.h>
+#include <Adafruit_SSD1306.h>
+#include "AS726X.h"
+
+AS726X sensor;
+Adafruit_SSD1306 display(4);
+
+void setup() {
+  Wire.begin();
+  Serial.begin(115200);
+  display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
+  display.clearDisplay();
+  sensor.begin();
+}
+
+void loop() {
+  display.clearDisplay();
+  display.setTextSize(1);
+  display.setTextColor(WHITE);
+  sensor.takeMeasurements();
+  //Prints all measurements
+    //Visible readings
+    display.setCursor(0, 0);
+    display.println("R:");
+    display.setCursor(10, 0);
+    display.println(sensor.getCalibratedRed(), 1);
+    display.setCursor(0, 10);
+    display.println("G:");
+    display.setCursor(10, 10);
+    display.println(sensor.getCalibratedGreen(), 1);
+    display.setCursor(0, 20);
+    display.println("B:");
+    display.setCursor(10, 20);
+    display.println(sensor.getCalibratedBlue(), 1);
+
+    display.setCursor(60, 0);
+    display.println("O:");
+    display.setCursor(70, 0);
+    display.println(sensor.getCalibratedOrange(), 1);
+    display.setCursor(60, 10);
+    display.println("Y:");
+    display.setCursor(70, 10);
+    display.println(sensor.getCalibratedYellow(), 1);
+    display.setCursor(60, 20);
+    display.println("V:");
+    display.setCursor(70, 20);
+    display.println(sensor.getCalibratedViolet(), 1);
+
+    display.display();
+    delay(500);
+
+
+}