UStawienie anyklikania

Automatyczne yłączenie ledów przy braku oświetlenia
Automatyczne wyłączenie wiatraka gdy brakuje wody

ESP32/StadlerHomeKitUpgrade/StadlerHomeKitUpgrade.ino

@@ -5,7 +5,7 @@
 #include "DHT.h"
 #include <Adafruit_NeoPixel.h>
 #include <BH1750.h>
-#define Version "0.3.3"
+#define Version "0.3.4"
 
 
 
@@ -42,7 +42,7 @@ const uint8_t ledMap[LED_COUNT] = { 3, 0, 1, 8, 2, 5, 4, 7, 6 };
 #define WTR_LVL 33       //GPIO33    D33
 // SDA D21
 // SCL D22
-#define DIMM_MAX_VALUE 3  // docelowo 4, tylko na testy
+#define DIMM_MAX_VALUE 4  //
 
 //NEO PIXEL ARDESES:
 #define NEOPXL_MULTIPLIER 25
@@ -77,8 +77,8 @@ bool turnOnFlag = true;
 int8_t resetVal = 0;
 int8_t fanSpeedVal = 1;
 int8_t hygrostatVal = 55;
-int8_t dimmStep = 1;
-int8_t dimmVal = 1;
+int8_t dimmStep = 3;
+int8_t dimmVal ;
 int8_t waterLvlVal = 0;
 int8_t photoVal = 0;
 float temp = 0.0;
@@ -103,6 +103,11 @@ int8_t neoPixelWaterLvlR = 1;
 int8_t neoPixelWaterLvlG = 1;
 int8_t neoPixelWaterLvlB = 1;
 int8_t neoPixelTank = 1;
+uint8_t LastSpdInpt = 0;
+unsigned long spdInptTimeStamp = 0;
+int changeSpdDelay = 30000; //interwał zmiany predkości - nie mniej niż wartość milisekund
+int8_t wtrLvlOff = 0;
+int8_t nightMode = 0;
 
 
 
@@ -118,28 +123,45 @@ void IRAM_ATTR speedButtonFcn() {
   if (fanSpeedVal >= 3) {
     fanSpeedVal = 1;
   }
+  spdInptTimeStamp = millis() - changeSpdDelay;
 }
 void IRAM_ATTR hygrostatButtonFcn() {
   hygrostatVal = hygrostatVal + 5;
   if (hygrostatVal > 65) {
     hygrostatVal = 45;
   }
+  spdInptTimeStamp = millis() - changeSpdDelay;
 }
 
 void setFanSpeed(uint8_t spdInpt) {
-  if (spdInpt == 1) {
-    digitalWrite(PIN_SPEED_2, LOW);
-    delay(300);
-    digitalWrite(PIN_SPEED_1, HIGH);
-  } else if (spdInpt == 2) {
-    digitalWrite(PIN_SPEED_1, LOW);
-    delay(300);
-    digitalWrite(PIN_SPEED_2, HIGH);
-  } else {
-    digitalWrite(PIN_SPEED_1, LOW);
-    delay(300);
-    digitalWrite(PIN_SPEED_2, LOW);
+  // if (wtrLvlOff == 1) {       dokomentować do testów wody
+  //   spdInpt = 0; 
+  // }
+
+  if (nightMode == 1 &&  spdInpt == 2 ){
+    spdInpt = 1;
   }
+
+  if ( millis() > (spdInptTimeStamp + changeSpdDelay)) {
+    if (LastSpdInpt != spdInpt) {
+        if (spdInpt == 1) {
+          digitalWrite(PIN_SPEED_2, LOW);
+          digitalWrite(PIN_SPEED_1, HIGH);
+          LastSpdInpt = spdInpt; 
+          spdInptTimeStamp = millis();
+        } else if (spdInpt == 2) {
+          digitalWrite(PIN_SPEED_1, LOW);
+          digitalWrite(PIN_SPEED_2, HIGH);
+          LastSpdInpt = spdInpt;
+          spdInptTimeStamp = millis();
+        } else {
+          digitalWrite(PIN_SPEED_1, LOW);
+          digitalWrite(PIN_SPEED_2, LOW);
+          LastSpdInpt = spdInpt;
+          spdInptTimeStamp = millis();
+        }
+      } 
+   }
 }
 
 void rainbowCycle(uint8_t wait) {
@@ -179,6 +201,20 @@ uint32_t Wheel(byte pos) {
 
 void setup() {
   Serial.begin(9600);
+
+  pinMode(BTN_RST, INPUT);
+  pinMode(BTN_DIMM, INPUT);
+  pinMode(BTN_SPEED, INPUT);
+  pinMode(BTN_HYGRSTT, INPUT);
+  pinMode(PIN_SPEED_1, OUTPUT);
+  pinMode(PIN_SPEED_2, OUTPUT);
+  digitalWrite(PIN_SPEED_1, LOW);
+  digitalWrite(PIN_SPEED_2, LOW);
+  pinMode(LED_RED_TANK, OUTPUT);
+  pinMode(LED_WHT_TANK, OUTPUT);
+  pinMode(IN_PHOTOTRA, INPUT_PULLDOWN);
+  pinMode(WTR_LVL, INPUT);
+
   if (!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
     Serial.println(F("SSD1306 allocation failed"));
   }
@@ -192,18 +228,6 @@ void setup() {
   display.println(Version);
   display.display();
 
-  // delay(500);
-  pinMode(BTN_RST, INPUT);
-  pinMode(BTN_DIMM, INPUT);
-  pinMode(BTN_SPEED, INPUT);
-  pinMode(BTN_HYGRSTT, INPUT);
-  pinMode(PIN_SPEED_1, OUTPUT);
-  pinMode(PIN_SPEED_2, OUTPUT);
-  pinMode(LED_RED_TANK, OUTPUT);
-  pinMode(LED_WHT_TANK, OUTPUT);
-  pinMode(IN_PHOTOTRA, INPUT_PULLDOWN);
-  pinMode(WTR_LVL, INPUT);
-
   attachInterrupt(digitalPinToInterrupt(BTN_DIMM), dimmButtonFcn, FALLING);
   attachInterrupt(digitalPinToInterrupt(BTN_SPEED), speedButtonFcn, FALLING);
   attachInterrupt(digitalPinToInterrupt(BTN_HYGRSTT), hygrostatButtonFcn, FALLING);
@@ -222,6 +246,7 @@ void setup() {
   } else {
     dimmVal = 24;
   }
+} //setup end
 void loop() {
   // ###################################################
   // WYŚWIETLACZ
@@ -340,11 +365,11 @@ void loop() {
   } else if (dimmStep == 1) {
     dimmVal = 1;
   } else if (dimmStep == 2) {
-    dimmVal = 6;
+    dimmVal = 2;
   } else if (dimmStep == 3) {
-    dimmVal = 12;
+    dimmVal = 4;
   } else {
-    dimmVal = 24;
+    dimmVal = 8;
   }
 
   // Ustawianie LED docelowych wartości
@@ -424,7 +449,7 @@ void loop() {
     neoPixelWaterLvlB = 0;
     analogWrite(LED_WHT_TANK, dimmVal * 8);
     analogWrite(LED_RED_TANK, 0);
-    // tu set fan
+    wtrLvlOff = 1;
   }
   if (waterLvlVal < 40 && waterLvlVal >= 25) {  //a bit of water TANK
     neoPixelWaterLvlR = 10;
@@ -432,6 +457,8 @@ void loop() {
     neoPixelWaterLvlB = 0;
     analogWrite(LED_WHT_TANK, 0);
     analogWrite(LED_RED_TANK, dimmVal * 8);
+     wtrLvlOff = 0;
+
   }
   if (waterLvlVal <= 24) {  // FULL TANK
     neoPixelWaterLvlR = neoPixelRed;
@@ -439,7 +466,7 @@ void loop() {
     neoPixelWaterLvlB = neoPixelBlue;
     analogWrite(LED_WHT_TANK, 0);
     analogWrite(LED_RED_TANK, dimmVal * 8);
-    // tu set fan
+    wtrLvlOff = 0;
   }
 
 
@@ -451,6 +478,12 @@ void loop() {
     neoPixelFilter = 1;
   }
 
+  if ( lux  < 0.5 ) {
+    dimmVal = 0;
+    nightMode = 1;
+  } else {
+    nightMode = 0;
+  }
 
 
   //NEOPIXELS